| Model |
HY-1000 |
HY-2000 |
HY-3000 |
| Appearance |
 |
 |
 |
| Power supply voltage |
110 V a.c / 220 V a.c 60 ㎐ |
Permissible Voltage Fluctuation Range |
Rated Voltage ±10 % |
| Consumption Power |
Approx. 3 VA max |
| Input |
Thermocouple, Resistive |
Thermocouple, Resistive, DC Current, DC Voltage |
| Adjusting Sensitivity |
±0.2 % (fixed) of Max. Range |
| Control Method |
Time Proportional Control, ON/OFF Control |
| Setting Method |
Analog Setting |
| Display Method |
Non-Display |
Deviation Display |
| Control Output |
Relay Output :Capacity 250 V a.c 3 A |
Relay Output : capacity 250 V a.c 3 A SSR Output : 12 V d.c Load Resistance : Above 800 Ω |
| Setting Accuracy |
Within ± 2.0 % of Max. Range |
| Display Accuracy |
HY-1000 : ±1.0 % (fixed) of Max. Range HY-2000 : ±2.0 % (fixed) of Max. Range |
±2.5 % (fixed) of Max. Range |
| Proportional Band |
3 % of Max. Range (fixed) |
| Proportional Cycle |
Relay Output : Approx. 20 sec, SSR Output : Approx. 2 sec |
| External Input Resistance |
Thermocouple : Below 100 Ω, Resistive : Below 10 Ω Per 1 Wire (The Resistance of Each Wire Should be the Same.) |
| Reset Range |
None |
| Alarm Setting Range |
- |
Alarm Output Adjusting Sensitivity |
- |
| Hysteresis |
Thermocouple : 1.2 ℃ (Below 600 ℃), 2.4 ℃ (Above 600 ℃)35 Resistive : 0.6 ℃ (Below 200 ℃), 1.2 ℃ (Above 200 ℃) |
| Dielectric Strength |
2000 V a.c 60 ㎐ for 1 Minute |
| Relay Life Expectancy |
Mechanical : Above 10 Millions Times, Electrical : Above 100 Thousands Times (250 V a.c, 3 A Resistive Load) |
Operating Ambient Temperature/Humidity |
0 ~ 50 ℃, 35 ~ 85 % R.H (Without Condensation) |
| Weight |
HY-1000 : 358 g (Including Brackets) |
HY-2000, 3000 : 558 g (Including Brackets) |